Here is an HO Scale ScaleTrains Rivet Counter BNSF GE ES44AC No. 5831 that has been heavily weathered. The locomotive features FRA yellow reflective tape from Fusion Scale Graphics. Positive Train Control (PTC) antennas have also been added to the cab roof.
Road Number Specific ScaleTrains
Era: 2005- Mid 2012s
Series 5798-5837, built 9-10/05
Road number: 5831
With PTC array
Fully assembled
Operating LED front, rear, and side walkway lights*
Operating LED front deck-mounted ditch lights
Prototype BNSF ES44s do not have ground lights
Directional LED headlights
Printed and LED lighted number boards*
See-through round-hole stepwell steps
Walkway with front anticlimber and support brackets
Front and rear raised pilot-mounted Multiple Unit (MU) receptacles
Front dummy Multiple Unit (MU) receptacles mounted to pilot face
Single train line hose with silver gladhand
Rear narrow-spaced dual dummy Multiple Unit (MU) receptacles
Narrow profile end handrails
Early handrails with left long rail for walkway access door clearance
GE “nub” tread plate on walkways
Front high-mounted (cab) numberboard housings
Early cab with optional 4 side windows; without barrel bolt latches on subbase doors
Left nose door with window
Single cab side blue flag holder
Detailed cab interior with separate floor, rear wall, seats, control stand, and grade crossing camera
Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side
Tinted cab side windows
Cab roof octagonal antenna dome with medium rectangle antenna dome
Sand box clean out door with knuckle buster latch
Etched metal see-through dynamic brake intake grilles with blower motors visible inside
See-through dynamic brake exhaust
Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof
Capacitor box on walkway
ES44 style engine cab doors: latched first door in each set of three
Separate exhaust stack
Flush radiator grille
Right side radiator cab grille arrangement: flush doors; grilles – high square, raised large rectangle, raised tall, raised tall, tall, short, tall, short front angled grill, two-piece rear angled grille
21 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
Accurately profiled frame with separately applied plumbing and cabling
AEI tag mounted to right sidesill
Toilet drain without exterior handle
Dual Graham-White (Prime) 075 air filters
Graham-White 994-500 air dryer
5,300-gallon fuel tank with internal waste retention tank, vertical fuel gauge, and round fuel gauge
Angled top left side fuel tank top box
Kadee 158 metal couplers
Factory-applied wire grab irons, snowplow, spare knuckles, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted electronic bell, brake wheel, and more.
All-wheel drive and all-wheel electrical pick-up
Dual flywheels
Motor with 5-pole skew wound armature
Printing and lettering legible under magnification
Operates on Code 70, 83, and 100 rail
Packaging safely stores model
Minimum Radius: 18”
Recommended Radius: 22
DCC & sound equipped locomotives also feature:
ESU-LokSound 5 decoder with “Full Throttle”
Dual cube-type speakers
Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more
ESU-designed PowerPack with two (2) super capacitors**
Operates on both DC and DCC layouts
DCC & sound ready locomotives also feature:
Here is an HO Scale ScaleTrains Rivet Counter BNSF GE ES44AC No. 5831 that has been heavily weathered. The locomotive features FRA yellow reflective tape from Fusion Scale Graphics. Positive Train Control (PTC) antennas have also been added to the cab roof.
Road Number Specific ScaleTrains
Era: 2005- Mid 2012s
Series 5798-5837, built 9-10/05
Road number: 5831
With PTC array
Fully assembled
Operating LED front, rear, and side walkway lights*
Operating LED front deck-mounted ditch lights
Prototype BNSF ES44s do not have ground lights
Directional LED headlights
Printed and LED lighted number boards*
See-through round-hole stepwell steps
Walkway with front anticlimber and support brackets
Front and rear raised pilot-mounted Multiple Unit (MU) receptacles
Front dummy Multiple Unit (MU) receptacles mounted to pilot face
Single train line hose with silver gladhand
Rear narrow-spaced dual dummy Multiple Unit (MU) receptacles
Narrow profile end handrails
Early handrails with left long rail for walkway access door clearance
GE “nub” tread plate on walkways
Front high-mounted (cab) numberboard housings
Early cab with optional 4 side windows; without barrel bolt latches on subbase doors
Left nose door with window
Single cab side blue flag holder
Detailed cab interior with separate floor, rear wall, seats, control stand, and grade crossing camera
Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side
Tinted cab side windows
Cab roof octagonal antenna dome with medium rectangle antenna dome
Sand box clean out door with knuckle buster latch
Etched metal see-through dynamic brake intake grilles with blower motors visible inside
See-through dynamic brake exhaust
Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof
Capacitor box on walkway
ES44 style engine cab doors: latched first door in each set of three
Separate exhaust stack
Flush radiator grille
Right side radiator cab grille arrangement: flush doors; grilles – high square, raised large rectangle, raised tall, raised tall, tall, short, tall, short front angled grill, two-piece rear angled grille
21 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
Accurately profiled frame with separately applied plumbing and cabling
AEI tag mounted to right sidesill
Toilet drain without exterior handle
Dual Graham-White (Prime) 075 air filters
Graham-White 994-500 air dryer
5,300-gallon fuel tank with internal waste retention tank, vertical fuel gauge, and round fuel gauge
Angled top left side fuel tank top box
Kadee 158 metal couplers
Factory-applied wire grab irons, snowplow, spare knuckles, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted electronic bell, brake wheel, and more.
All-wheel drive and all-wheel electrical pick-up
Dual flywheels
Motor with 5-pole skew wound armature
Printing and lettering legible under magnification
Operates on Code 70, 83, and 100 rail
Packaging safely stores model
Minimum Radius: 18”
Recommended Radius: 22
DCC & sound equipped locomotives also feature:
ESU-LokSound 5 decoder with “Full Throttle”
Dual cube-type speakers
Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more
ESU-designed PowerPack with two (2) super capacitors**
Operates on both DC and DCC layouts
DCC & sound ready locomotives also feature:
